\documentclass[twocolumn]{article}

\usepackage{JIAS,multicol,times}

\usepackage{epsfig}


\parindent0pt


\begin{document}
\pagestyle{empty}
\sloppy


\title{How to Format Your Paper for JIAS}

\author{{\bf First Author$^1$, Second Author$^2$ and Third author$^3$} \\[1em]
$^1$Monash University, School of Business and Economics, \\
McMahons Road, Frankston 3199, Australia \\
\textit{john.doe@email.com} \\[1em]
$^2$School of Computer Science and Engineering, Chung-Ang University,\\
221, Heukseok-dong, Dongjak-gu, Seoul 156-756, Korea\\
\textit{jane.doe@email.com} \\[1em]
$^3$Monash University, Department of Management,\\
McMahons Road, Frankston 3199, Australia}

\maketitle


\begin{abstract} These Instructions give you basic guidelines for
preparing camera-ready papers for the Journal of Information
Assurance and Security. This is the abstract. It is justified and in
10point bold font. The heading ``Abstract'' a run-in heading and
appears about 75mm below the top of the page. The rest of this paper
will provide format examples for all of the major components of your
paper. \end{abstract}

\keywords{about six key words separated by commas.}

\section{Introduction}

This is an example of the format you will be using to prepare
your paper for publication in the Journal of Information Assurance and Security.
You should use an easily readable font,preferably Times Roman, for
all fonts in the paper. Please do not use a typewriter-style
font such as Courier.
The remainder of this article will provide examples of the
formats of all the major components of your paper. Please
follow these directions as closely as possible to ensure that
our proceedings looks like the quality publication the content
will make it.

For those who are not familiar
with typesetting terms, here are a few key definitions that
will make reading the following easier:

%
%% This itemized list has tighter spacing than the default
%% LaTeX itemized list.
%
\begin{itemize}
\item point - A unit of measure equal to 1/72 of an inch. A 10 point font
then is 10/72 of an inch. Point is often abbreviated ``pt''.
\item leading - the space between lines of text.
\item 1" = 2.54 cm.
\end{itemize}

%
%% You have to suppress indents following lists like this:
%
\noindent
When preparing your paper, please be sure to consider and
incorporate the comments from your reviewers. They spent
their time reading your paper and making comments in order to
help you publish the best paper possible.

\section{Page Size and Layout}

This format is designed for international A4 paper size.
which will be the published size of the proceedings. Here are
the margin sizes for the format:

\begin{enumerate}
\item Top Margin - 1.0" (25 mm)
\item Left Margin - 0.75" (19 mm)
\item Right Margin - 0.75" (19mm)
\item Bottom Margin - 1.0" (25mm)
\end{enumerate}

\noindent
For those using US letter paper, you should
stick to the Top and Left Margins and let the Bottom and
Right Margins take up the excess. This goes for other paper
sizes as well.

The double column layout requires the following measurements
for the text columns:

\begin{itemize}
\item Column Width - 83.5mm (3.29")
\item Column Height - 248.0mm (9.76")
\item Gap Between Columns - 5.0mm (0.2")
\end{itemize}

\noindent
You are allowed exactly 8 pages for your publication. No
more. You can always take fewer pages but you may not take
more than 8 pages. This includes all figures, tables, graphs,
photos, and bibliography entries. If you simply must have
more than 8 pages, the additional cost is \$US100 per extra
page.

\section{Title, Authors, Body Paragraphs, Sections Headings and References}

\subsection{Title and authors} The title of the paper is centered
17.8 mm (0.67") below the top of the page in 24 point font. Right
below the title (separated by single line spacing) are the names
of the authors. The font size for the authors is 11pt. Author
affiliations shall be in 9 pt.

\subsection{Body Paragraphs} The main text for your paragraphs
should be 10pt font. All body paragraphs (except the beginning of
a section/sub-section) should have the first line indented about
3.6 mm (0.14").

All body paragraphs should have the first line indented about
0.175" (4.4 mm) except for the first paragraph following a
heading which is not indented.

\subsubsection{Figures and Tables}

Place illustrations (figures, tables, drawings, and photographs)
throughout the paper at the places where they are first discussed
in the text, rather than at the end of the paper. Number
illustrations sequentially (but number tables separately). Place
the illustration numbers and caption under the illustration in 10
pt font. Do not allow illustrations to extend into the margins or
the gap between columns (except 2-column illustrations may cross
the gap). If your figure has two parts, include the labels ``(a)"
and ``(b)".

\begin{figure*}[htbp]
    \begin{center}
  \epsfig{file=header.ps,width=15cm,height=3cm}
      \caption{JIAS header, expanded on 2 columns}
      \label{fig:logo}
    \end{center}
~\\ % a blank line to leave some space below the caption
\end{figure*}

\begin{table}[t1] %
\caption{Comparing the results for the function optimization
problems.}
\begin{center}
\begin{tabular*}{0.48\textwidth}{@{\extracolsep{\fill}}l l l} \hline
\textbf{Method} & \textbf{Best result} & \textbf{Average result}
\\\hline Fuzzy systems &
0.24 & 0.30 \\
Genetic algorithms & 0.17  &  0.28\\
Neural Networks & 0.20 & 0.27\\\hline
\end{tabular*}
\end{center}
\end{table}

\section{Section Headings}

Section headings come in three varieties: first level
headings, sub-headings (i.e. greater than first level heading)
and unnumbered headings. All section headings should be
numbered sequentially, except for unnumbered headings which
are, of course, unnumbered.

\subsection{First-level Headings}

First level section headings, (i.e. 1.0) are 12pt bold with
12pt of leading before and 6pts of leading after.

\subsection{Higher Sub-Headings}

For Sub-Headings higher than First-Level, use 10pt bold font.
It is permissible to use italics for these headings, but be
consistent!

\subsection{Unnumbered Headings}

The section heading for the Acknowledgments and Bibliography
sections are both unnumbered headings. These headings are
identical to First-Level Headings except they do not have
numbers. See the end of this example article for how they
should look.

\section{Footnotes}

Footnotes, should be used sparingly\footnote{When used too
much, footnotes can ruin a paper by breaking-up the flow of
the thoughts in the text.} if at all\footnote{Most times a
parenthetical remark within the text body is sufficient and a
footnote can be avoided.}. Footnotes should be 9pt font with
1 pt leading and should appear at the bottom of the page
within a single column\footnote{Be sure not to violate the
bottom margin by the placement of a footnote!}. A thin rule
(line) should be used to set off the footnote from the
text\footnote{As shown at the top of this set of footnotes.}.

Moreover, \LaTeX\ tends to lose balance between columns if too many
footnotes are present.

\section{Citations in Text}

Author's name and year, e.g., (Fogel 1995), is the preferred
format. But use the form you are most comfortable with. Check
to be sure that the references are complete and accurate.

The bibliography format again should be whatever you are
comfortable with. Be sure to
list the page numbers for articles appearing in edited
volumes, such as conference proceedings. Also be sure to list
the first initials and full last names of the editors for an
edited volume.


\section{Illustrations}

Place illustrations (figures, tables, drawings, and
photographs) throughout the paper at the places where they
are first discussed in the text, rather than at the end of
the paper. If placed at the bottom or top of the page, the
illustration may run across both columns.

This is a test with a figure into one single column
  \begin{figure}[htbp]
    \begin{center}
    \epsfig{file=header.ps,width=5cm,height=2cm}
      \caption{JIAS header}
      \label{fig:1col}
    \end{center}
  \end{figure}

and you can see at top of this page Figure \ref{fig:logo} running
accross both columns.

Number illustrations sequentially (but number tables separately).
Place the illustration numbers and caption under the illustration
in 9pt font. Do not allow illustrations to extend into the margins
or the gap between columns (except 2-column illustrations may
cross the gap).

\section{Conclusions}

If you have any questions, please consult the JIAS webpage.

\section*{Acknowledgments}

Please provide acknowledgement only after the conclusion section.
The authors acknowledge support from ICCNS, grant number 09-123.

\begin{thebibliography}{99}

\bibitem{ange96} A. Bonnaccorsi. On the Relationship between Firm
Size and Export Intensity, \emph{Journal of International Business
Studies}, XXIII (4), pp. 605-635, 1992. (journal style)

\bibitem{caves96} R. Caves. M\emph{ultinational Enterprise and
Economic Analysis}, Cambridge University Press, Cambridge, 1982.
(book style)

\bibitem{clerc99} M. Clerc. The Swarm and the Queen: Towards a
Deterministic and Adaptive Particle Swarm Optimization. In
\emph{Proceedings of the IEEE Congress on Evolutionary Computation
(CEC)}, pp. 1951-1957, 1999. (conference style)

\bibitem{crokell86} H.H. Crokell. Specialization and International
Competitiveness, in \emph{Managing the Multinational Subsidiary}, H.
Etemad and L. S, Sulude (eds.), Croom-Helm, London, 1986. (book
chapter style)

\bibitem{deb2000} K. Deb, S. Agrawal, A. Pratab, T. Meyarivan. A
Fast Elitist Non-dominated Sorting Genetic Algorithms for
Multiobjective Optimization: NSGA II. \emph{KanGAL report 200001},
Indian Institute of Technology, Kanpur, India, 2000. (technical
report style)

\end{thebibliography}

\vspace{5mm}

\noindent{\bf\Large Author Biographies} \vspace{5mm}

\textbf{First Author} The first paragraph may contain a place and/or
date of birth (list place, then date). Next, the author's
educational background is listed. The degrees should be listed with
type of degree in what field, which institution, city, state or
country, and year degree was earned. The author's major field of
study should be lower-cased.    If a photograph is provided, the
biography will be indented around it. The photograph is placed at
the top left of the biography.

\vspace{4mm}

\textbf{Second Author} The first paragraph may contain a place
and/or date of birth (list place, then date). Next, the author's
educational background is listed. The degrees should be listed with
type of degree in what field, which institution, city, state or
country, and year degree was earned. The author's major field of
study should be lower-cased.   If a photograph is provided, the
biography will be indented around it. The photograph is placed at
the top left of the biography.




\end{document}
